Tips for Tiles
This product is manufactured by applying state of the art
coatings to ¼ inch thick Tempered Hard Board. A protective film
is then applied and the sheet is laser cut to the finished tile dimensions.
Our tests have shown that by laser cutting the resins in the edge of the
tile are cauterized thereby creating a durable edge.
It is however possible to damage the tile if one picks at the corner
or edge with a fingernail or sharp instrument to try to remove the protective
film. We have found the best way to remove the film and minimize the risk
of damage is to use the tacky side of a piece of protective film recently
removed from a tile. Drag the tacky side of the film along the top surface
of the tile starting at the corner and moving towards the center of the
tile. If you do not have an extra piece of film handy, you can use the
pad of your thumb or forefinger in the same manner to peel back the edge.